NOTE: blemished EMR-C is functionally flawless, it has handling spot(s) from anodizing that is invisible when installed.
The Enhanced Magazine Release-Competition features a slightly curved button surface to fit the
natural curvature of your finger. The
form fitting curve, along with horizontal serrations, create a self centering
surface that inhibits the finger's vertical movements. The EMR-C has an uninterrupted surface and
serrations, its taller profile makes it easier to press and is only 0.04 taller
than the factory magazine release button. When installed, the EMR-C has a 0.08 protrusion above the mag release button fence on most forged receivers.
Due to the EMR-C's height which protrudes 0.08" over the mag release fence when installed (only 0.06" or 0.07" of the magazine release button travel is needed to drop a magazine), EMR-C is recommended for sporting AR15s and 308 ARs only. For defense and duty ARs and M16s, please use our EMR that has only a 0.01" protrusion over most forged receiver magazine release fence.
For .308 ARs, the EMR-C' taller profile will allow you to use AR15/M16 spec mag catch and ambidextrous mag catch/release. An EMR-C installed on a .308 AR will not protrude over the mag release fence.
Made from 7075 T3 aircraft grade aluminum bar stock, it is
Type 3 Hard Coat anodized. Proudly made
in the USA.