Your Price: $71.00
In Stock.
Part Number:OPF-G, ACRO
ATTENTION, Steiner MPS users: MPS's recoil lug underneath the sight may vary in width and be slightly wider than that of the ACRO.  Should this be the case, firmly push the MPS on the plate, or gently tap on the sight until the MPS fully seats.

OPF-G, ACRO produced from late May, 2022 has a slightly widened (by 0.002) recoil lug slot to better accommodate MPS.

OPF-G, ACRO (Optics Platform, Glock, for RMR) is a Glock MOS Adapter Set 01 compatible plate for mounting Aimpoint's ACRO P1 and P2 on Glock Gen 4 and Gen 5 slides, G17, G19, G34, G35, G41 (width 25mm/1 inch.), and G40.

We like the Glock MOS concept, even if we find the factory MOS adapter plates could use some help.  Standards, commonality, availability of parts are all good things.  Heretofore, users have had to send in their slides to be milled to accept mini red dot sights, or opt for 3rd party optics ready slides.  The time it takes to send in the slides to be milled, and varying quality of the milling work and optics ready slides notwithstanding, there was a lack a standard regarding the sight height, it'd be a coincidence if two slides milled by two different shops share the same sight height.   Glock's MOS may not sit as low as some, but in our opinion, what MOS offers more than makes up for it, namely a uniform sight height, ease of installation, parts commonality and availability.

OPF-G, ACRO is identical to the Tangodown AAM-01.  Based on the success of the OPF-G, RMR, we had been asked to develop a Glock MOS compatible plate for the superb Aimpoint ACRO.  We saw and tested what our friends at Tangodown has already made, and determined AAM-01 is exactly how we would have done it and there was nothing we could have done better, there is therefore no reason to create another one just like it under our name.  We don't like rebranding, but do make exceptions when the products in question are outstanding, and we share the same values as the companies that make them.  We've known Tangodown and its folks for a long time, we carry Tangodown products, and are proud to be able to put our logo on the AAM-01 and make it OPF-G, ACRO.

OPF-G, ACRO is machined in 4140 steel and Melonite coated.  For a short time, OPF-G, ACRO will have both our Cygnus logo, and Tangodown's logo in tandem.

Proudly designed and made in the USA.

Torque value for plate to slide: 13 in·lb.
Torque value for ACRO P1/P2 mounting screw: 26 in·lb.

Vibra-tite VC-3 is included with OPF-G, ACRO.  Instructions can be found here: https://www.vibra-tite.com/wp-content/uploads/213_tds.pdf
Vibra-tite also provides a video on the application of VC-3: https://www.vibra-tite.com/portfolio-items/vc-3-threadmate-overview-video/

For good printable 8x11"  RMR targets (1MOA dot, 2MOA dot, 6.5MOA dot at 100 yard, 50 yard, 25 yard, and 15 yard), please follow this link: https://www.barelytactical.org/targets/

5 Stars
Awesome mount
I bought this plate direct from TD. Awesome fit and finish, great tolerances. Initially had a set of Ameriglo XL height sights that provided a usable, but minimal sight picture. Replaced them with the Heinie Optic height sights and love them. Like they were made for the Acro. One note, the mounting screws came with some pre-applied vibratite, and I dont believe it was enough. The plate came loose within the first 500 rounds. I applied blue loctite and remounted, and has been solid since, about another 2500 rounds.
Did you find this helpful?  8 of 8 Found Helpful
Reviewed by:  from FL. on 6/28/2020
5 Stars
Excellent Product
Fitment and finish are excellent with no tooling marks anywhere. I’m only approximately 2,500 in on this MOS pistol/optic combination, but thus far no shift in zero or other indicators that things have loosened up.
Did you find this helpful?  3 of 3 Found Helpful
Reviewed by: (Verified Buyer)  from Freeport, FL. on 1/6/2022
5 Stars
ACRO Plate
This is the second plate I have purchased from Forward Controls. Awesome plate and excellent fit on both plates. I ordered the wrong plate by mistake and they corrected the issue quickly even though it was 100% my fault. They were very patient with me. Will be back for more.
Did you find this helpful? 
Reviewed by:  from NY. on 5/28/2022

Related Items


Recently Viewed Items