OPF-G, EFLX is compatible with GLOCKs that use GLOCK's G17, G19, G45, G47, G49, G20, G21 G22, G23, G26, G34, G40, all but the slim line Glocks (G43X and G48).
OPF-G, EFLX is compatible with the Leupold's Delta Point Pro. If the plate engraving says DPP only, it is the same plate we use for both DPP and EFLX.DPP sight to plates are longer, while EFLX uses shorter screws. Do not use DPP sight to plate screws with the EFLX.
Note that OPF-G, EFLX comes with plate to slide mounting screws, but not the sight to plate screws that will with EFLX sight.
OPF-G, EFLX (Optics Platform, Forward Controls, EFLX ) is compatible with EOTech's new EFLX sight. OPF-G, EFLX uses the same proven design of the OPF-G, RMR to keep the EFLX immobile, the simplest and most effective way to prevent sight to plate mounting screws from loosening and shearing.
While EFLX uses 4 recoil lugs (twice as that of the RMR's) and beefier mounting screws, the challenges of keeping the sight on the plate without loosening or shearing the sight to plate screws are not very different from those of the RMR. OPF-G, EFLX has a front and rear fence, the tight tolerances of the plate to slide, and sight to plate insures minimum movement along the bore in recoil.
OPF-G, EFLX ships with 2 plate to slide screws (M3 0.5mm x 6mm), a T10 wrench, and a packet of VC-3. A torque wrench is necessary to properly install both the plate to slide, and sight to plate screws. EFLX sight to plate screws are not included, as they are shipped with the EFLX sight.
Torque value:
Plate to slide: 13in/lb
Sight to plate: 20 to 25 in/lb
Note that OPF-G, EFLX comes with plate to slide mounting screws, but not the sight to plate screws that will with EFLX sight.
EFLX requires backup sight sets with at least 0.365 front sight height. Sight sets with 0.365" will be very low in the EFLX sight window, with only the top of the sights visible. Sight sets with 0.407" will be easier to use.
Billet machined in 4140, hat treated and black nitride coated.
For individual officer or LE agency level discount, please contact us.
OPF-G, EFLX is a collaboration between Tangodown and FCD. Proudly designed and made in the USA.
NOTE:
OPF-G, EFLX is compatible with the Leupold's Delta Point Pro. If the plate engraving says DPP only, it is the same plate we use for both DPP and EFLX.DPP sight to plates are longer, while EFLX uses shorter screws.
If you attempt to torque the DPP screws in with an EFLX installed, you can bend or break the plate. Do not use DPP sight to plate screws if you have and EFLX.
DISCLAIMER: This product is not manufactured, authorized, endorsed,
or warranted by GLOCK. GLOCK does not warrant or represent that
this product is compatible with GLOCK pistols.
GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Forward Controls Design nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, components or accessories.
For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
[ITEMPRICE]