NOTE:
OPF-PDP v2, ACRO will NOT work on Walther PDP v1, as it is made for PDP v2 only. PDP v2 slides have a longer optics cut, the serial numbers start with FDL9203, FDM0001, FDN3124).
OPF-PDP, ACRO is only guaranteed to work with Aimpoint ACRO P1 and P2, and Steiner's MPS. We have not tested it with the cheap Chicom sights under different guises from various companies that purportedly use the ACRO footprint. We neither endorse, nor support their use on OPF-G, ACRO. For defense and duty, we also do not recommend P2 copies/clones.
OPF-PDP v2, ACRO is compatible with PDP-F.
The above V2 serial numbers made available by Walther are from 2021, please remove the cover plate and verify the version.
Based on our successful Glock MOS compatible plate design, OPF-PDP, PDP is made for the superb Walther PDP and Aimpoint ACRO P1/P2, and compatible with Steiner MPS.
Featuring the same tight tolerances and design that hold the sight immobile on the plate. We did have some reservations, for we're a small company, and only choose to take on projects where we can truly bring improvement to the platform, it is not our goal to create a plate for every pistol that can accept one, nor every optic that exists.
Machined from solid 4140 steel and black nitride treated. As with any and all OPF line of optics plates, OPF-PDP v2, ACRO is a solid state design with no moving parts.
Ameriglo GL-811, GL-815, or GL-506 will work with OPF-PDP v2, ACRO and provide lower 1/3 co-witness. GL-429 will provide lower 1/4.
Plate to slide M3 0.5 x 6mm screws are provided, along with a packet of VC-3 Vibra-tite.
Torque value for plate to slide: 13 in·lb.
Torque value for ACRO P1/P2 mounting screw: 26 in·lb. For Steiner MPS, 24 in·lb.
OPF-PDP v2, ACRO is a joint project with our friends at Tango down. Made in USA.