OPF-S, RMR requires a Trijicon or aftermarket RMR sealing plate.
Trijicon's new RCR and RMR HD are both compatible with OPF-S RMR. If you have an RCR, you must use the capstan screws that came with the RCR.
From October of 2023, we've begun to transition T10 sight to plate screws to T15.
OPF-S, RMR (Optics Platform, Staccato, RMR) is designed for optics ready Staccato P, C, C2, CS with the factory or aftermarket 0.265 and 0.285 front sight. OPF-S, RMR features a dovetail compatible with the steel rear sight we designed and make for OPF-S, RMR and OPF-S, ACRO.
Precision milled from a solid block of 4140 and nitride coated, OPF-S, RMR is a solid state plate sans moving parts. We have taken steps to make the plate as light as possible, there is a rather significant lightening cut on the plate, which necessitates the use of a sealer plate for Trijicon RMR.
Plate to slide torque value: 20 to 25 in/lb
Sight to plate torque value: 13 in/lb
Proudly designed and made in the USA.
NOTE:
* OPF-S, RMR requires a Trijicon or aftermarket RMR sealing plate.
* OPF-S, RMR requires Staccato factory or aftermarket 0.285 front sight height for either FCD designed and made steel rear sight. Measured from the top of the slide to top of the front sight, it's 0.285".
If your DPO plate and rear sight looks like this, this rear sight will NOT work with OPF-S, RMR's dovetail.
NOTE:
* Trijicon's new RCR and RMR HD are both compatible with OPF-S, RMR.
* We will soon stop including the L keys with all OPF products, L keys will become optional, we strongly suggest a proper torque wrench to impart the correct torque value.
[ITEMPRICE]